Mita DP-2800 Instruction Handbook Manual page 94

7.3.3.3Manual Selection of Filters
The EcoLAN 1000E ships with an input filter called psfilter and an output filter called
psbanner to print PostScript banners.
You may wish to change infilter or outfilter entries in the /etc/printcap file. The
following is a sample printcap entry using these filters:
<print_name>
:lp=/dev/nic/<printer_name>:\
:if=/usr/nic/psfilter:\
:of=/usr/nic/psbanner:\
:sd=/usr/spool/<printer_name>:
7.3.3.4Installing and Printing on Ver. 1 Solaris and OSF1 Systems
1. Run the Installation script by typing: nicinst.
The script automatically downloads the correct EcoLAN 1000E utilities for your particu-
lar system and prompts you for information as needed.
2. What is the node name of the Print Server unit?
Type the node name entered in /etc/hosts. For example: printfast and press ENTER.
3. What is the printer name?
Type the desired printer name and press ENTER.
4. Your screen will now display the information you provided to the install script.
For example:
Node name of the EcoLAN 1000E: printfast
Printer name to be used: <printer_name>
The printer is attached on: PORT 1
You are asked to OK this configuration. Type yes or no and press ENTER.
5. Is this printer PostScript?
Type yes or no and press ENTER.
TCP/IP Configuration 7-30
| EcoLan 1000E printer:\