Enable/Disable Network Protocols; Restore Factory Defaults; Change Password - Mita DP-2800 Instruction Handbook Manual

2. To change the set of emulations, type 1 and press ENTER. The options shown
below will appear..
3. To delete an emulation, select the number opposite the language listed. For exam-
ple, type 1 and press ENTER to delete PCL. Typing 1 again will again select
PCL.
4. From the LPD Printers menu, press 2 to toggle Banners between
Enabled/Disabled.

7.4.4 Enable/Disable Network Protocols

To enable network protocols, at the Main menu type 3 and press ENTER.
You are given the choice of disabling either NetWare or AppleTalk since both
network OS's are enabled by default. For example, to disable Appletalk, type 2 and
press ENTER.

7.4.5 Restore Factory Defaults

When it is necessary to restore factory defaults on your print server, choose 4 on the
Main Menu and press ENTER. All NVRAM stored parameters will be returned to
their factory default values. The factory default values will not take effect until the
Telnet program is exited, or, the unit is powered cycled.

7.4.6 Change Password

When you want to establish a new password, enter 5 from the Main menu. Type up to
eight characters after the New Password query and press ENTER. Retype the same
characters at the Retype New Password query and press ENTER. Use the Save
Changes and Exit option. Once you have established your password using Change
Password, the password sysadm will be rejected.
Printer 1
1. PCL
2. PS
3. ASCII
4. OTHER
PCL PS OTHER
TCP/IP Configuration 7-43