Chapter 3 Using The Management Access Program Or A Standard Web Browser; Where To Place The Map Utility; How To Install Map In Windows - Mita DP-2800 Instruction Handbook Manual

Using the Management Access Program or a
The Management Access Program (MAP) is a Windows-based HTML viewer
program linked with a proprietary bi-directional IPX channel program to allow access
to the EcoLAN 1000E's HTML-based monitoring and maintenance capabilities. An
IP Web Browser also provides access to this capability. Either program allows you to:
• Configure your network protocols for the EcoLAN 1000E.
• Reset the EcoLAN 1000E remotely to either clear an error condition, or return the
print server to its factory default settings.
• Troubleshoot problems in the EcoLAN 1000E.
• Enable or disable the status sheet printout.
• Access a context-sensitive help menu that fully explains how to use each
Management Access Program feature.
Note: To be able to change parameter values with the Management Access Program or
the Web Browser, you must know the EcoLAN 1000E management password.
The factory default password is "sysadm".
3.1

Where to Place the MAP Utility

The utility can be installed on any workstation hard drive or network drive.
3.2

How to Install MAP in Windows

The Management Access Program must be installed from Windows, it CANNOT be
installed from DOS. Use the following procedures to install:
1. Start Windows on your PC or workstation.
2. Insert the supplied PC diskette into the A: or B: drive.
3. For Windows 3.x, bring up the Windows Program Manager, select the File menu.
Using the Management Access Program or a Standard Web Browser 3-1
Standard Web Browser
3