Mita DP-2800 Instruction Handbook Manual page 95

6. The script creates a printcap entry for the printer just configured. The screen dis-
plays the entry and asks if you want the script to append it to your /etc/printcap
file. See below for a sample printcap file. Type yes or no and press ENTER. If
you type no, you may perform manual edits.
In your /etc/printcap file, be sure not to change the name of the device given EcoLAN
1000E in Step 2. You must reference the same lp: entry you wrote on the lp command
line of the printcap file. For example:
<printer_name> | ´coLAN 1000E printer:\
:lp=/dev/<printer_name>:\
:if=/usr/nic/infilter:\
:sd=/usr/spool/<printer_name>:
All printcap entries must be prefaced with a tab except for the entry on the first line.
7. The script creates a spool directory in /usr/spool and starts the daemon for the
newly configured printer. It also displays the path used if you ever need to restart
the daemon. For example:
/usr/nic/lpr_print /dev/nic/<printer_name> printfast 9100 &
8. Run the ps command so that you can view all your lpd processes.
Type: ps -ax | grep lpd
9. Kill all of your lpd processes. Type: kill -9 <Process ID> (this will stop ALL
printing).
10. Restart the daemon.
Type: /usr/lib/lpd
11. Installation for the system is done. You are prompted to configure any more print-
ers.
Type yes or no and press ENTER. We also suggest you ping the EcoLAN 1000E to test
communications.
7.3.3.5Installing & Printing on an DEC ULTRIX 4.3 System
1. Run the Installation script by typing: nicinst.
The script automatically downloads the correct EcoLAN 1000E utilities for your particu-
lar system and prompts you for information as needed.
2. What is the node name of the Print Server unit?
Type the node name entered in /etc/hosts. For example, printfast and press ENTER.
TCP/IP Configuration 7-31