Mita DP-2800 Instruction Handbook Manual page 86

This entry will send jobs spooled at /usr/spool/lpd/<printer_name> to the printer
designated <printer_name> to be printed at port 1 (the internal connection to the
printer) of the EcoLAN 1000E designated as <remote_host>.
2. Create the spooling directory. For example, type:
mkdir /usr/spool/lpd/<printer_name>
3. To print via the spooler, use the lpr command. Type:
lpr-P <printer_name>< file_name>
Installation and testing is done. You are now ready to print.
7.2.2.2Setting Up an AIX Version 2.5 Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the EcoLAN 1000E using the
EcoLAN 1000E's lpd. Use the following procedures to do this:
1. At the prompt, type:
#smit spooler <cr>
2. When a window appears, select Manage Remote Printers.
3. When a menu appears, select Client Services.
4. Another menu appears, select Remote Printer Queues.
5. Another menu appears, select Add a Remote Queue.
6. When a window appears, change the values shown to configure the EcoLAN
1000E. The values displayed are default values. You must replace the short and
long form filter values with the values shown below.
Requested Information
Inputted Data
Name of queue to add
queue Destination Host
Short Form Filter
Long Form Filter
Name of remote printer
queue
Name of device to add
7. After you have supplied all values, press e.
TCP/IP Configuration 7-22
Example
print1
printfast
/usr/lpd/bsdshort
/usr/lpd/bsdlong
PORT1
print1
Description of Inputted Data
Name of local printer
EcoLAN 1000E
IP hostname
Required value
Required value
EcoLAN 1000E
Name of local queue