Mita DP-2800 Instruction Handbook Manual page 129

reset OBJECT-TYPE
SYNTAX INTEGER (1..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing a '1' to this variable causes the unit to reset.
Variable reads back as '0' "
::= { dpidiag 1 }
factory OBJECT-TYPE
SYNTAX INTEGER (1..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing a '1' to this variable causes the unit to initialize
itself to the factory default settings. Variable reads back as '0'."
::= { dpidiag 2 }
downloadreset OBJECT-TYPE
SYNTAX INTEGER (1..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Writing a '1' to this variable causes the unit to initialize for
flash download. Variable reads back as a '0'"
::= { dpidiag 3 }
downloadprotocol
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies which protocol to use for
flash download. The default is NetWare."
::= { dpidiag 4 }
-- the only download presently implemented is NetWare, regardless of value set. Variable
reads
-- back as 65535
downloadpath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable specifies a pathname to retrieve
a download file. This variable is currently not used."
::= { dpidiag 5 }
-- NIC variable reads back as N/A.
Statusreporttype
SYNTAX INTEGER (0..3)
ACCESS read-write
OBJECT-TYPE
OBJECT-TYPE
NIC MIB Definition Appendix C-3