Mita DP-2800 Instruction Handbook Manual page 87

You can now print.
7. 3.2.3Setting Up an AIX 4.0 System
Use the following procedures to install a EcoLAN 1000E in an AIX 4.0 system:
1. Run SMIT Printer.
2. Select Print Spooling.
3. Select Add a Print Queue
4. Select Remote.
5. Use Standard Processing.
6. Assign a queue name.
7. Use the host address of the EcoLAN 1000E for the Remote System.
8. Use PORT1 for the queue on the remote system.
9. Add a description (optional).
10. Press e to generate.
Installation is complete. Test your printer by executing the following command:
lp -d<queue_name> <file_name>
7.3.2.4Setting Up an HP/UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to a EcoLAN 1000E using the
EcoLAN 1000E lpd. To do this:
1. At the prompt, type: sam
2. When a window appears, select Printer/Plotter Manager.
3. When the menu appears, select List printer and plotters.
4. When a list appears, select Actions in the title bar.
5. From the pull-down menu, select Add Remote Printer.
6. When a window appears, add values to configure EcoLAN 1000E. See the follow-
ing example.
Input Requested
Printer Name
Remote System Name
Remote printer Name
Description of Inputted Data
Example
myprinter name to be used in lp command
fastprint EcoLAN 1000E
PORT1 lpd queue name
hostname as in /etc/hosts
TCP/IP Configuration 7-23