Chooser Setup And Selecting Installed Options - Mita DP-2800 Instruction Handbook Manual

6.4 Chooser Setup and Selecting Installed Options

After the running the installer and renaming the printer, the user must follow the steps
below to complete installation:
1. Under the Apple Menu, select Chooser.
2. In the Chooser, select the DP-2800 Driver, the zone if any, then highlight the
desired DP-2800 model appearing under Select a PostScript Printer. The default
name of the printer is KYO_ followed by the 1000E six digit serial number. Select
Setup.
3. Under Selected PPD, choose the DP-2800 PPD that matches the desired model.
Turn on Background Printing if desired and close the Chooser.
EcoLAN 1000E and the Macintosh Computer 6-4