Remote Control Setup List - Yamaha DME Designer Owner's Manual

Remote Control Setup List

Registers the parameters to be controlled from an external controller. Refer to the "DME-N Remote
Control Protocol Specifications" document for details about the communication protocol. Information
about the "DME-N Remote Control Protocol Specifications" document can be found at the Yamaha pro
Audio website (URL below).
http://www.yamahaproaudio.com/
[DME]
Click to see a list and select a DME.
[Function]
Select [No Assign], [Parameter Value Edit] or [Level Meter].
[Parameter]
Specifies the parameter to be controlled. A list of parameters will be displayed according to the
selection of [Function].
[Min]/[Max]
Displays the minimum and maximum values for the parameter.
[Type]
Selects a fader curve when level, etc., is select for [Parameter].
Select [dB] to directly control the level in dB, or [Curve Table] to use one of the DME fader curves
for level adjustment.
Chapter 3 Main Panel Window
DME Designer Owner's Manual 123