Yamaha DME Designer Owner's Manual page 374

Chapter 6 Component Guide
All Inputs to One Output
When you click the output channel number on the matrix, the [Matrix Mixer - All Inputs to One
Output] editor window opens. All input channels and one output channel are displayed. The output
channel is the one you have clicked on in the matrix mixer component editor.
1
2
3
4
5
6
7
8
9
Output Channel Switching
[Matrix Mixer - All Inputs to One Output] editor window displays the output channel clicked in the
matrix mixer component editor. The [Channel] buttons in the [Output] section of the [Matrix Mixer -
All Inputs to One Output] editor window switch the channel group that is displayed in the window.
If you make the matrix mixer component editor active while the [Matrix Mixer - All Inputs to One
Output] editor window is displayed, and then click another output channel, that channel group will
be displayed in the [Matrix Mixer - All Inputs to One Output] editor window.
One [Matrix Mixer - All Inputs to One Output] editor window is displayed for each matrix mixer
component editor.
374 DME Designer Owner's Manual
1
2
Section Parameter
Bus Send Level Level
On
Output Channel
On
Meter
Block On
Off
Nominal
Minimum
4
Setting Range
- to +10 dB Sets the output signal level for each input channel.
ON/OFF Turns ON the output for each input channel.
-- Displays the selected output channel. Select
another channel from a menu.
ON/OFF Turns ON the output for the channel displayed in
the window.
-- Displays the output signal level of the channel
displayed in the window.
-- Turns ON all channel inputs. When turned ON, the
[On] button lights up.
-- Turns OFF all channel inputs.
-- Resets all input signal levels, making them 0 dB.
-- Reset all input signal levels, making them - dB.
3
6
7
8
9
5
Function