Yamaha DME Designer Owner's Manual page 343

Double click the component to open the component editor. Mono channel and stereo channel
components have the same parameters.
1
Limiter Curve
2
Gain Reduction Meter
3
Output Meter
Parameter
4
Threshold -54 dB to ±0 dB
5
Attack 0 to 120 ms
6
Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
9
KeyIn Mono
Stereo
)
On ON/OFF
Limiter component editor
1
2 3
Name
Setting Range
SELF
KEYIN
L
R
LR BOTH
KEYIN
+20
RATIO=20:1
+10
0
Threshold=–20dB
–10
–20
–30
–40
–50
–60
–70
–70 –60 –50 –40 –30 –20 –10
Input Level (dB)
Chapter 6 Component Guide
4
5 6
7 8
Function
Displays the limiter response in graph form. The
horizontal axis represents input signal level and the
vertical axis represents output level.
Displays the amount of gain reduction.
Displays the output signal level.
Function
Sets the threshold value.
Sets the attack time.
Sets the release time. The range varies according
to the operating frequency.
The trigger source can be selected from this menu.
The currently selected source is displayed in the
button.
Turns the limiter ON.
0 +10 +20
DME Designer Owner's Manual 343