Yamaha DME Designer Owner's Manual page 367

One Input to All Outputs
When you click the input channel number on the left side of matrix, the [Delay Matrix - One Input to
All Outputs] editor window opens. One input channel and all output channels are displayed. The
input channel is the one you have clicked on in the delay mixer component editor.
1
6
2
3
7
4
8
5
Section Parameter
1
Input Channel
2
Phase
3
Level
4
Solo
5
On
6
Bus Send Level Delay
7
Level
8
On
9
Block On
)
Off
!
Nominal
@
Minimum
Input Channel Switching
The [Delay Matrix - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the delay matrix component editor.
The [Channel] buttons in the [Input] section of the [Delay Matrix - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
Setting Range
-- Displays the selected input channel. Select another
channel from a menu.
ON/OFF Reverses the phase of the input signal.
- to +10 dB Sets the input signal level.
ON/OFF Turns solo ON.
ON/OFF Turns input ON.
0 to 500 Sets the delay time for each output channel.
- to +10 dB Sets the signal level for each output channel.
ON/OFF Turns ON the output for each output channel.
-- Turns ON all channel outputs. When turned ON, the
[On] button lights up.
-- Turns OFF all channel outputs.
-- Resets all output signal levels, making them 0 dB.
-- Resets all output signal levels, making them - dB.
Chapter 6 Component Guide
9
)
!
@
Function
DME Designer Owner's Manual 367