Yamaha DME Designer Owner's Manual page 364

Chapter 6 Component Guide
Input Master
If you click the [Input Master] button in the delay matrix component editor, it will open the [Delay
Matrix - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
1
2
3
4
5
6
7
8
364 DME Designer Owner's Manual
[Delay Matrix - InputMaster] editor window
1
2
3
4
Section Parameter
Input Phase
Level
Solo
On
Block On
Off
Nominal
Minimum
Setting Range
ON/OFF Reverses the phase of each channel's signal.
- to +10 dB Sets the level of the signal from each channel's
input.
ON/OFF Turns ON solo for each channel.
ON/OFF Turns ON each channel's input.
-- Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
-- Turns OFF input for all channels in the Input Master
window.
-- Resets all input signal levels in the Input Master
window, making them 0 dB.
-- Resets all input signal levels in the Input Master
windows, making them - dB.
5
6
7
8
Function