Creating Parameter Links - Yamaha DME Designer Owner's Manual

Chapter 5 Components

Creating Parameter Links

You can group controls (parameters) and link their parameters. You can create parameter link groups
and add controls to them in the component editor. Parameter link settings are made in the Parameter
Link window. For information about parameter links and the Parameter Link window, see "Parameter
Link" (page
NOTE
A parameter can belong to one group only. Furthermore, only parameters of the same type can be grouped.
Creating Parameter Links
If you right-click on a control, a context menu will be displayed.
The [Global Link]
Controls can be added by right-clicking.
Adding Controls to a Group
If you right-click a control in the component editor, a context menu will be displayed. You can
create groups or add controls using commands in the [Add Parameter to Parameter Link]
submenu. Groups that do not have the same type of parameters will be grayed out and cannot be
selected.
Global Link
The group names for global link groups are displayed in the [Global Link] submenu. When you
click a group name, a control is added to the group.
314 DME Designer Owner's Manual
73).
[Add Group] and [Local Link] [Add Group] commands create new groups.