Yamaha DME Designer Owner's Manual page 265

Back Button
This button appears in the child window of windows that have a parent-child relationship, and can
be clicked to return the parent window.
Status Bar
Component Name
Component Name
Displays the component name.
Component ID
Displays the component ID.
NOTE
When controlling the DME64N/24N by connecting an RS-232C compatible controller to the [REMOTE] terminal, a
component ID is required for distinguishing the same components in the DME64N/24N. The component ID is included in
the signal that controls the component parameters. For details about control methods, contact your nearest Yamaha
representative or the authorized distributor at the end of the DME64N/24N Owner's Manual.
Parameter ID
Displays the parameter ID for controls that are being operated.
Snap
Up to four component editor parameter sets can be recorded temporarily. You can switch between
parameter sets using buttons.
Parameter sets can be copied by dragging and dropping a button onto any other button. Copy can
also be carried out from the contextual menu that appears when a button is right-clicked.
Library
Saves and recalls component editor parameter sets as files.
See "Library" on page
Graph
Displays the effects of the component in a graphical format. When parameters are changed, the
graph changes too. In graphs that have control points, adjust parameters by dragging the points.
As you drag the points, the corresponding parameters reflect the changes you make.
Meter
Displays the signal level.
Slider/Knob
You can change parameters by dragging the corresponding sliders or knobs.
275.
Chapter 5 Components
Component ID
Parameter ID
DME Designer Owner's Manual 265