Chapter 6 Component Guide
Crossover
Separates input signals into multiple frequency channels and outputs them. The following five types of
components are available in the Crossover group: 2 Way, 3 Way, 4 Way, 5 Way, and 6 Way.
Crossover components have a single input and multiple outputs.
Double-click a component to display the component editor for it.
1
2
3
4
5
6
316
DME Designer Owner's Manual
Crossover component
1
3
2
)
!
@
Name
Crossover Curve
Section
Parameter
Input
Level
Output
Level
Mute
Phase
Frequency
Frequency
6
4
5
7
8
9
Setting Range
- to +10 dB
- to ±0 dB
ON/OFF
ON/OFF
20 Hz to 20 kHz
Function
Displays the level of each frequency band,
distinguished by color.
Function
Sets the input signal level.
Sets the output signal level for each
frequency band.
Mutes the output signal level for each
frequency band.
Reverses the phase of the output signal for
each frequency band.
Sets the cross frequency between each
frequency band.