Wav File Manager - Yamaha DME Designer Owner's Manual

Chapter 3 Main Panel Window

Wav File Manager

When you click [Wav File Manager] on the [Tools] menu, the "Wav File Manager" dialog box is
displayed. Here you can manage playback settings for Wave files played in the Wav File Player. This is
set for each DME. The setting can be made only when in offline status. Up to 100 Wave files can be
managed.
Up to a maximum of 12 megabytes of Wave files can be registered for each DME unit. If a Wave file is
added that will exceed this amount, a warning message will be displayed.
NOTE
These settings can be edited only by users for whom the [Edit] checkbox in the "Security" dialog box has been turned ON.
NOTE
Only Wave files with file names of 31 characters or less, (including the extension) can be registered. Check the Wave file
name beforehand. Change the name if it has 32 or more characters, including the extension.
NOTE
When saving project files including Wave files, select "Project File with wave (*.daf)" in the file save dialog box.
[DME]
From the list, select the DME you want to set. The DMEs included in the current zone are displayed
in the list.
[Wave File]
Displays the Wave file information. Settings can be made here as well.
[No.]
The Wave file number is displayed in the leftmost column. Numbers are added from the top in
order.
[List Name]
You can set up to 27 characters as a label separate from the Wave file name. The Wave file name is
displayed here by default.
[File Name]
Up to 31 characters are displayed as the wave file name. If you double-click the name, the file
selection dialog is displayed, where you can select a file.
128 DME Designer Owner's Manual