Yamaha DME Designer Owner's Manual page 256

Chapter 4 Designer
Security Settings
Sets user module security.
[Enable Security]
Enables user module security.
If you place a checkmark here, the "Set Password" dialog box appears. Enter the same password
into the [Password] box and [Confirm Password] box, and click the [OK] button.
[Set Password] Button
Changes the password. Clicking here displays the "Input Password" dialog box. Enter the current
password and click the [OK] button. The "Set Password" dialog box will be displayed. Enter the
same password into the [Password] box and [Confirm Password] box, and click the [OK] button.
If you try to save a user module with the same name as an already saved user module, a message
asking "This file already exists. Overwrite?" will be displayed. To overwrite, click the [Yes] button. To
change the name, click the [No] button, and change the file name in the "Save User Module"
dialog box.
NOTE
When the "Save User Module" dialog box is displayed, the name set in the user module's "User Module Properties"
dialog box will be entered into the [File name] box. If you change the name of a user module and save it using the "Save
User Module" dialog box, the filename in the user module and the user module name displayed in the Toolkit window will
also change.
The [Label] box displayed in the "User Module Properties" dialog box will not change.
NOTE
If characters not usable in file names are used in the file name set in the "User Module Properties" dialog box, an error
message will be displayed at the same time as the "Save User Module" dialog box. Delete the unusable characters
before saving.
256 DME Designer Owner's Manual