Yamaha DME Designer Owner's Manual page 6

Getting Started
Main Changes from V1.0 to V1.1
Main Panel Window
• Instead of the former Parameter Link function, there are now two functions: a Global Link function
that links parameters within all DMEs in a zone and a Local Link function that links parameters
within a single DME unit. (
• The Synchronization function can now not only send data from DME Designer to the DME unit,
but can also synchronize by reading data from the DME unit. (
• Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input
function. (
• DME unit events can now be recorded by the Event Logger function and displayed in the Event
Logger window. (
• The time for executing an event can now be set by using the Event Scheduler function.
(
• Parameters in the current configuration can now be listed on the display and printed out by using
the Parameter List function. (
• The Wav File Manager can manage Wave files played by the Wav File Player. (
• Settings can be made by the DAW Control function that are used for controlling DMEs from a
DAW controller. (
• DME unit data can now be saved as a backup file by using the Backup function. (
Designer Window
• The port name display can now be switched between long name display and short name display.
(
• DME64N cascade connections can now be set. (
• Priority items can now be set when compiling configurations by using the [Compile Priority]
function in the "Preferences" dialog box. (
• Delay time can now be displayed for each component by using the Show Signal Delay function.
(
• Monitoring points can now be edited by using the "Monitoring Point List" dialog box. (
• The status of connections in a configuration can now be analyzed in advance by using the
Analyze function, without connecting the DME unit. (
• You can now set the action that occurs when you double-click a user module object. You can also
turn user module security ON or OFF, and set a password. (
• Libraries with component parameters saved in them can now be recalled from the context menu
for a component object. (
• A new rule for wiring prohibits connections to terminals that would short the terminator.
Component Editor/Component
• A status bar has been added to the component editor. It displays the component name,
component ID, and parameter IDs for parameters that are being edited. (
• A Snap function has been added that records parameters in the editor temporarily. Parameter
sets can then be switched by using the Snap buttons. (
• The meter's peak hold function can now be turned ON or OFF. (
• A Wav File Player component has been added for playing Wave files. (
• An effect component called SPX has been added that supports many different effect
applications, such as reverb, delay, and modulation effects, along with complex combinations of
multiple effects. (
• A Slot Out component editor has been added. (
• An Undo/Redo function is now available when using the design mode. It can undo the most
recent operation (control movement/resize/deletion).
6 DME Designer Owner's Manual
page
page 80)
page 111)
page 116)
page 132)
page 148)
page 246)
page
page 397)
73)
page 124)
page
page 209)
page
277)
page 409)
page 75)
page
165)
249)
page 254)
page 265)
page 273)
page 291)
page 359)
128)
page 135)
page 247)