Midi Device Setup; Midi Port Setup (Windows) - Yamaha Card Filer Manual

MIDI Device Setup

You will need to specify the MIDI device drivers through which your computer will
communicate with your MIDI instrument. Follow the procedure below.
n
If you are using a Macintosh, refer to the section

MIDI Port Setup (Windows)

1. Select "MIDI Port Setup" from the "Setup" menu.
The "MIDI Port Setup" dialog box is displayed.
2. Click on each of the " " buttons for the "MIDI IN Port" or "MIDI OUT
Port", select the MIDI driver from the drop-down list that is displayed.
• If the MIDI instrument's TO HOST terminal is connected directly to the computer's serial port.
Select the "Yamaha CBX Driver" for the "MIDI IN Port", and the "Yamaha CBX A Driver" for the
"MIDI OUT Port".
• If the MIDI instrument's MIDI ports are connected to the computer via a MIDI interface.
For both the "MIDI IN Port" and "MIDI OUT Port", select the MIDI driver that is compatible with
the MIDI interface you are using.
n
For information about how to install YAMAHA CBX Driver, refer to the README file in the "Mididrv" folder of the
included CD-ROM.
3. Click [OK].
"OMS Settings" on page 6.
5