Yamaha DME Designer Owner's Manual page 329

Delay
When you click the [Delay] button for the crossover processor, it opens the delay editor window.
Here you can set the delay for each frequency band.
Parameter
1
Delay ms: 0 to 500
Sample: the range depends on the Fs value.
Meter: 0 to 171.8
Feet: 0 to 563.6
Frame: the range depends on the Frame value.
Beat: the range depends on the Beat value.
2
Level - to ±0 dB
3
On ON/OFF
4
Delay Scale ms
Sample
Meter
Feet
Frame
Beat
1
2
3
Setting Range
Chapter 6 Component Guide
4
Function
Sets the delay time.
Sets the output signal level for each
channel.
Turns delay ON.
Selects the units for setting the delay
time. The selected button will light up,
and the units in the [Delay] edit box
will change.
If [Beat] is selected, use the knob to
set the BPM (beats/minute).
DME Designer Owner's Manual 329