Internal Head Amp - Yamaha DME Designer Owner's Manual

Chapter 6 Component Guide

Internal Head Amp

In the DME24 configuration window, there are [Unit Input] and [Unit Output] blocks. They are the
Analog In and Analog Out DME24 I/O ports.
Unit Input
Double-click [Unit Input] to display the component editor for it.
1
2
Analog Out
Double-click [Unit Output] to display the component editor for it. The displayed parameters are the
same as for Slot Out component editor.
412 DME Designer Owner's Manual
Internal Head Amp component editor
1
2
Parameter Setting Range
+48 ON/OFF
Gain +10 to -60 dB
Function
Turns ON phantom power (+48V).
Sets the head amp gain.