Yamaha DME Designer Owner's Manual page 379

Parameter
1
CSR
2
Pan
3
Pan Nominal Position
LR
Separates a single input into left and right outputs. Components are available with 1, 2, 4, 8, 12, and
16 channels.
Double-click a component to display the component editor for it. The number of channels varies
depending on the component, but all share a common configuration in the component editor.
Parameter
1
Pan
2
Pan Nominal Position
LCR component editor
1
2
3
Setting Range
0 to 100% Sets the ratio for sending the center signal to LR.
L63 - Center - R63 Sets LR orientation.
Center Selects the nominal position from a menu.
LR
Pan component editor
1
2
Setting Range
L63 - R63 Sets the LR orientation.
Center Selects the nominal position from a menu.
LR
Chapter 6 Component Guide
Function
Function
DME Designer Owner's Manual 379