Yamaha DME Designer Owner's Manual page 150

Chapter 4 Designer
[User Module Manager]
Displays the "User Module Manager" dialog box. Here you rename or delete user modules.
[Show Signal Delay]
The digital signal delay value is displayed in the configuration window with sample units.
[Analyze]
Displays the "Analyze" dialog box, and analyzes the configuration.
[Probe Monitor]
Turns the probe monitor ON or OFF. This command can be selected only when a Configuration
window or User Module window is active while in online status.
[Monitoring Point List]
Opens the "Monitoring Point List" dialog box. Registers points for monitoring with headphones.
[Edit Mode]
Turns the edit mode ON or OFF.
NOTE
Only users for whom the [Operation Security]
select this command.
[Sheet]
Opens the "Sheet" dialog box. Sets the sheet size and background.
[Prohibit Diagonal Connections]
Allows you to draw horizontal and vertical wires only. Diagonal wires cannot be drawn.
[Grid]
Opens the "Grid" dialog box. Displays or hides the grid and sets the grid spacing.
150 DME Designer Owner's Manual
"User Module Manager" Dialog Box in "User Modules"
"Show Signal Delay (Delay Display Value)" in "Configuration Window"
"Analyze (Configuration Analysis)" in "Configuration Window"
"Probe Monitor" in "Configuration Window"
"Monitoring Point List" in "Configuration Window"
"Edit Mode" in "Editing Configurations"
"Sheet" in "Objects" (page
"Drawing Settings" in "Drawing and Editing Wires"
"Grid" in "Design Window Shared Settings and Operations"
(page 244)
(page
(page 136)
[Edit] checkbox in the "Security" dialog box has been checked can
200)
(page
(page 250)
(page 246)
(page 249)
247)
223)
(page 210)