Parameter Change] Tab - Yamaha DME Designer Owner's Manual

Chapter 3 Main Panel Window
[All Assign] Button
Assigns all scenes in order starting from program number 1.
Bank Select LSB
The bank is changed when assigning scenes numbered 129 and higher. Eight banks can be used,
numbered from zero to seven. Click the [ ] and select the bank where you will make settings.

[Parameter Change] Tab

Specifies the parameter to be controlled by parameter change commands for each address. Up to
128 can be set.
[DME]
From the list, select the DME where you will be making settings.
94 DME Designer Owner's Manual