Yamaha DME Designer Owner's Manual page 149

[Tools] Menu
[Area Parts List]
This command can be used only when the Area window is active. A submenu displays the same
objects that are in the Toolkit window displayed while the Area window is active. Clicking an object
on the submenu, then clicking the Area window, places that object in the Area window.
[Area Parts List] in "Toolkit Window"
[Device List]
This command can be used only when the Zone window is active. A submenu here displays the
same objects as the Toolkit window. Clicking an object on the submenu, then clicking the Zone
window, places that object in the Zone window.
[Zone Device List] in "Toolkit Window"
[Component List]
This command can be used only when a Configuration window or User Module window is active.
A submenu here displays the same objects as the Toolkit window. Clicking an object on the
submenu, then clicking the Configuration/User Module window, places the object in that window.
"Component List (Configuration Window)" in "Toolkit Window"
(User Module Window)" in "Toolkit Window"
[Zone]
Displays the "Zone" dialog box. Here you can add, delete, or rename a zone.
See "Adding, Deleting, and Renaming a Zone" on page
[Configuration]
Displays the "Configuration" dialog box. Here you can add, delete, or rename a configuration.
See "Adding, Deleting, and Renaming a Configuration" on page
[Save User Module]
This command can be used only when a User Module is selected in the Configuration window.
Saves the selected user module.
"User Module Manager" Dialog Box in "User Modules"
(page 153)
(page 154)
(page 155)
231.
(page
Chapter 4 Designer
(page 154), "Component List
233.
255)
DME Designer Owner's Manual 149