Remote Control Setup Popup Window - Yamaha PM1D Manager V2 Owner's Manual

not be affected.) The following data will be initial-
ized.
– Current scene settings
– Current unit settings
– Current patch settings
– Name assigned in the NAME function of each
function
– Setup data (internal parameters not stored in
the scene)

REMOTE CONTROL SETUP popup window

To open the REMOTE CONTROL SETUP popup
window, choose [Remote Control Setup] from the
[Option] menu of the menu bar. In this window you
can make settings related to remote control (→p.14).
1
4
5
9
0
1 REMOTE MACHINE
When the system goes online, or when you click the
RE-SYNCHRONIZE button to establish synchroni-
zation, this field will indicate the model name
(DM2000 V2, 02R96 V2, DM1000 V2) of the remote
controller from the MIDI port. You can also select
the model name manually, even if no remote con-
troller is connected.
2 RE-SYNCHRONIZE
This button obtains remote controller model infor-
mation from the specified MIDI port. It also trans-
mits PM1D Manager parameter data to the remote
controller.
3 ONLINE/OFFLINE indication
This will indicate ONLINE when communication
with the remote controller has been established.
4 CH ASSIGN
Here you can assign the correspondence between
input channels of the remote controller and input
2 3
6
7
8
A B
Screens unique to PM1D Manager
Memory initialization can be performed only when
offline.
4 OK button
When you click this button, the settings that you
modified in Communication Setup will be finalized,
and the popup window will close.
5 CANCEL button
When you click this button, the settings that you
modified in Communication Setup will be discarded,
and the popup window will close.
channels of the PM1D, in units of two channels. If
you don't want to make an assignment, choose "NO
ASSIGN."
5 SCENE ASSIGN
Here you can select the PM1D scene memory num-
bers that correspond to scene memory numbers 00–
99 of the remote controller.
6 MIX ASSIGN
Here you can select the PM1D's MIX channels that will
correspond to the remote controller's AUX channels 1–
8 (or 1–12 on the DM2000 V2). By operating the AUX
channels of the remote controller you can control the
corresponding MIX channels of the PM1D.
7 MATRIX ASSIGN
Here you can select the PM1D's MATRIX channels
that will correspond to the remote controller's BUS
channels 1–8. By controlling the BUS channels of the
remote controller you can control the corresponding
MATRIX channels of the PM1D.
8 STEREO ASSIGN
Here you can select the PM1D's STEREO channel
(STEREO A or B) that will correspond to the remote
controller's STEREO channel.
9 ATT
This selects whether ATT operations on the remote
controller will control the PM1D's ATT or its HA
GAIN (or digital gain).
0 IN EQ LOW
This selects whether LOW band EQ operations on an
input channel of the remote controller will control
the PM1D's LOW band EQ or its HPF.
A OUT EQ
This selects the set of four bands on the PM1D's
input channel EQ that will be controlled by operat-
ing the four-band EQ of an output channel on the
remote controller.
LOW: SUB LOW, LOW, LOW MID, MID bands
HIGH: LOW MID, MID, HIGH MID, HIGH bands
B EXIT
Closes the REMOTE CONTROL SETUP popup win-
dow.
9