Yamaha DME Designer Owner's Manual page 96

Chapter 3 Main Panel Window
Min/Max
This sets the parameter range. The current values for the [Min] (lower limit) and [Max] (upper limit)
are displayed. The range and units that can be set will vary, depending on the parameter selected.
If you click here, a slider will be displayed.
You can change the parameter by dragging the slider. To make a finer setting, press the <Shift>
key while dragging the slider. The value for the parameter will be shown while you are dragging the
slider. When you finish dragging and release the mouse button, the slider will disappear.
The same slider is displayed whether you click the [Min] box or the [Max] box. The black part is the
parameter range. If you drag the left edge of the black part, the [Min] value will change. If you drag
the right edge, the [Max] will change.
[Clear] Button
Clears the assignment for the parameter change selected in the list, so that nothing will be
assigned to it.
[All Clear] Button
Clears all parameter change assignments.
96 DME Designer Owner's Manual