Yamaha DME Designer Owner's Manual page 161

Chapter 4 Designer
When I/O Cards Are Installed in DME Expansion Slots
When an I/O card is selected for an expansion slot in the DME properties, an I/O port is added for
the DME arranged in the Zone window. An I/O component block will be added to the configuration
window.
If [None] is selected for I/O cards in the DME properties, any I/O component blocks will also be
deleted automatically from the Configuration window. (Even if the I/O components are deleted, the
wiring will remain.)
DME64N block with card inserted in a slot and the Configuration window
When the DME64N Cascade Setting is Turned ON
When [Show Cascade Port] is checked in the DME64N "DME Device Properties" dialog box, the
cascade I/O components will be displayed in the Configuration window.
If "Show Cascade Port" is turned OFF in the DME64N "DME Device Properties" dialog box,
cascade I/O components will also be deleted automatically in the Configuration window. (Even if
the Cascade I/O components are deleted, the wiring will remain.)
DME Designer Owner's Manual 161