Yamaha DME Designer Owner's Manual page 380

Chapter 6 Component Guide
Surround
There are three types of surround pan components in the Surround subgroup: 3-1, 5.1, and 6.1.
The surround pan component editor has a two-dimensional surround pan graph where you can set the
location of the sound image.
1
2
3
4
5
6
7
8
9
)
You can set the sound location using the mouse in the two-dimensional surround pan graph.
The sound image location is displayed at the bottom of the two-dimensional surround pan graph, but
numbers cannot be entered there.
380 DME Designer Owner's Manual
Surround 6.1 component editor
2
8
1
5
Name
2D Surround Pan Graph
Speaker L Left
Button
C Center
R Right
Ls Left Surround
Bs Back Surround
Rs Right Surround
LFE Low Frequency
Effect (Sub Woofer)
Left-Right Position
Front-Back Position
3 4
6 7
9 )
Location,
Setting Range
-- Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
L63 F63 Clicking here moves the sound image to the
button location.
C F63
R63 F63
L63 R63
C R63
R63 R63
-- Indicates that there is a sub woofer. Clicking
makes the LFE level 0 dB. The sound image
does not move by clicking.
L63 - C - R63 Displays the LR sound image.
L63 - C - R63 Displays the front-back sound image.
Function