Backup - Yamaha DME Designer Owner's Manual

Backup

When you click the [Backup] command on the [Tools] menu, the "Backup" dialog box is displayed.
Data in the DME is gathered in the computer and saved as a file. Backup files are created for each
DME. You can also send the information saved in a file to a DME. Backup can be performed only when
in offline status.
NOTE
Backup operations can be performed only by users for whom the [Edit] security checkbox has been checked.
[Target DME]
Displays DME, IP addresses, and DME types for each zone. Check the DME from which you want
to obtain data. You can place checks next to multiple DMEs.
[Folder] Box
Specifies the folder that will be the destination for saving and reading operations. Clicking the
[Browse] button opens the folder select dialog box, where you can specify a folder.
The backup file name will be the DME's IP address. If the folder is specified when sending DME
data, the file sent to the DME will be the file in the folder whose file name that matches the DME's IP
address.
[Load] Button
Sends the backed up file to the specified DME.
[Save] Button
Obtains data from the specified DME, and saves it as a backup file.
[Close] Button
Closes the dialog box.
Chapter 3 Main Panel Window
DME Designer Owner's Manual 135