Yamaha DME Designer Owner's Manual page 78

Chapter 3 Main Panel Window
Network
The devices currently connected to the network are displayed in the Network list. To keep
consistency with the Designer list on the left side, the status of DMEs on the network is displayed.
IP Address
• DME Icon
• IP Address
Message Area
Displays a message that synchronization is in progress.
Reading from the DME Unit
When you are offline in a condition where it is possible to go online, you can read data.
Before this can be done, configurations, such as cards inserted in the slots and any connected serial
devices, must agree for the DME unit and DME Designer.
Preset data overwritten in the DME unit is read, along with every type of parameter setting managed in
DME Designer.
NOTE
The event log is read in the Event Logger.
78 DME Designer Owner's Manual
DME Icon
Displays DME and ICP1 devices connected to the network. The zone master DME icon is red.
Icons for slave DMEs are blue. DMEs and ICP1 devices with no relation to DMEs in Designer
have gray icons.
Displays the DME IP address.