Fsdownload Command - Xerox DP N24 System Administrator Manual

Downloading Fonts and Macros
FSDOWNLOAD
Command
Syntax @PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = "pathname"] [<CR>] <LF>
<binary data><ESC>%-12345X
Parameters Parameter
SIZE=integer
NAME="pathname"
SIZE =
The size indicates the number of bytes immediately following the <LF> to the next UEL
command.
NAME =
named "fontname" to the DP N40 or = 0:\PCL\MACROS\<macroname> to download a macro
named "macroname" to the DP N40. "Fontname/macroname" can be any combination of up to
512 alphanumeric characters.
<binary data> — This is the binary file data to be downloaded, such as font files and macro data.
5-4 DP N24, N32 and N40 System Administrator Guide
The FSDOWNLOAD command is used to download fonts or
macros to the DP N40 file system. If a file with the same name
exists, the downloaded file overwrites it.
Functional Range
0 to 2
ASCII 01 thru 255
integer — The size variable indicates the number of bytes in the file to be downloaded.
"pathname" — where "pathname" = 0:\PCL\FONTS\<fontname> to download a font
Use of 1 rather than 0 in the "pathname" will download the font or macro to the Flash
RAM rather than to the hard drive.
Default
31
- 1 N/A
N/A