Error Messages On The Display - Ricoh Priport DX 4640PD Network Manual

Error Messages on the Display

This section describes the most common network-related messages that appear
on the display. If a message not described here appears, act according to that
message.
Reference
Before turning the main power off, see "Turning On the Power", Operating In-
structions.
Message
Ethernet Error
IEEE802.11b Error
Causes
An error has occurred in the
Ethernet module.
IEEE 802.11b card was not in-
serted when the printer was
turned on, or it was pulled out
after the printer turned on. An
error has occurred in the IEEE
802.11b card.
Error Messages on the Display
Solutions
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
9
99