Ricoh Priport DX 4640PD Network Manual page 92

Appendix
SMB
Use the "smb" command to configure or delete the NetBEUI settings such as the
computer name or workgroup name.
msh> smb parameter
Parameter
comp
group
comment
notif {on | off}
clear comp
clear group
clear comment
Note
❒ You cannot use a computer name starting with "RNP" or "rnp".
web
Use the "web" command to display and configure parameters on Web Image
Monitor.
❖ View Settings
msh> web
❖ URL Configuration
You can set URLs linked by clicking [URL] on Web Image Monitor.
9
Specify "1" or "2" for x as the number corresponding to the URL. Up to two
URLs can be registered and specified.
msh> web url http://"The URL or IP address you want to reg-
ister"/
❖ Deleting URLs registered as link destinations
msh> web x clear url
Specify "1" or "2" for x as the corresponding number to the URL.
❖ Link name configuration
You can enter the name for [URL] that appears on Web Image Monitor.
Specify "1" or "2" for x as the corresponding number to the link name.
msh> web name "Name you want to display"
❖ Deleting URL names registered as link destinations
msh> web x clear name
Specify "1" or "2" for x as the number corresponding to the link name.
86
Settings
Your computer name consisting of up to 15 characters
Workgroup name consisting of up to 15 characters
Comment consisting of up to 31 characters
You can enable or disable notification of print job completion.
Clears the computer name
Clears the Workgroup name
Clears comment