Ricoh Priport DX 4640PD Network Manual page 43

J
Create a print queue as follows:
Note
❒ If you are using a currently defined print queue, proceed to step
A On the [Available Options] menu, click [Print Queue Information], and then
press the {ENTER} key.
B Press the {INSERT} key, and then enter a print queue name.
C Press the {ESCAPE} key to return to the [Available Options] menu.
K
Create a printer as follows:
A On the [Available Options] menu, click [Print Server Information], and then
press the {ENTER} key.
B To create a new print server, press the {INSERT} key, and then enter a
print server name.
Note
❒ If you are using a currently defined print server, select one of the print
servers shown in the [Print Server] list.
Important
❒ Use the same name as that specified in NIB Setup Tool. (Step
C On the [Print Server Information] menu, click [Print Server Configuration].
D On the [Print Server Configuration] menu, click [Printer Configuration].
E Select the printer indicated as "Not Installed".
Important
❒ Use the same number as that specified as the Remote Printer No. using
NIB Setup Tool. (Step
F If you want to change the printer name, enter a new name.
Note
❒ The name "Printer x" is assigned to the printer. "x" stands for the
number of the selected printer.
G Click [Remote Parallel, LPT1] as the printer type.
IRQ, Buffer size, Starting form, and Queue service mode are automatically
configured.
H Press the {ESC} key, and then click [Yes] when the confirmation message
appears.
I Press the {ESC} key to return to the [Print Server Configuration] menu.
G
-D).
Printing with NetWare
K
G
-A).
37
5