Ricoh Priport DX 4640PD Network Manual page 46

Using the Printer Function
H
Quit SmartDeviceMonitor for Admin.
I
On Windows, start NWadmin.
Reference
For details about NWadmin, see the operating instructions that come with
the NetWare.
J
Create a print queue as follows:
Note
❒ If you are using a currently defined print queue, proceed to step
A Select the container object the print queue is located in from those in the
directory tree, and then click [Create] on the [Object] menu.
B In the [Class of new object] box, click [Print Queue], and then click [OK].
C In the [Print Queue name] box, enter the name of the print queue.
D In the [Print Queue Volume] box, click [Browse].
5
E In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
F After checking the settings, click [Create].
K
Create a printer as follows:
A Select the container object where the printer is located, and then click
[Create] on the [Object] menu.
B In the [Class of new object] box, click [Printer], and then click [OK]. If you are
using NetWare 5/5.1, 6, click [Printer (Non NDPS)].
C In the [Printer name] box, enter the name of the printer.
D Select the [Define additional properties] check box, and then click [Create].
L
Assign print queues to the created printer as follows:
A Click [Assignments], and then click [Add] in the [Assignments] area.
B In the [Available objects] box, click the queue created in step
click [OK].
C Click [Configuration], and in the [Printer type] list, click [Parallel], and then
click [Communication].
D In the [Communication type] area, click [Manual load], and then click [OK].
E After checking the settings, click [OK].
40
K
.
K
, and then