Printing With A Mac Os; Changing To Ethertalk - Ricoh Priport DX 4640PD Network Manual

Using the Printer Function

Printing with a Mac OS

This section describes how to configure a Mac OS computer to use EtherTalk.
Actual procedures may vary depending on the version of the Mac OS. The fol-
lowing procedures describe how to configure Mac OS 9.1 and Mac OS X v10.1.
If you are using other version than Mac OS 9.1 and Mac OS X v10.1, see the man-
ual that comes with Mac OS for details.
5
Note
❒ Mac OS 8.6 and later versions are supported (except for Mac OS X v10.0.x).
❒ To print from a Mac OS, PostScript3 board is required.

Changing to EtherTalk

Follow the procedure below to configure a Mac OS computer to use EtherTalk.
Reference
For details about installing the software required for EtherTalk, see the Mac
OS manuals.
Mac OS
A
Open [Control Panel], and then double-click the AppleTalk icon.
B
On the [Connect via] pop-up menu, click [Ethernet].
C
If you change zones, select a name on the [Current zone] pop-up menu.
D
Close the [AppleTalk] control panel.
E
Click [Save].
F
Restart the Mac OS.
28