Network Configuration - Ricoh Priport DX 4640PD Network Manual

Setting Up the Machine on a Network
*1
Check [Active] is selected for TCP/IP.
*2
Appears when the IEEE 802.11b interface unit is installed.
If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the printer, the
selected interface has priority.

Network Configuration

Any change you make with User Tools remains in effect even if the main power
switch or operation switch is turned off, or if the {Clear Modes} key is pressed.
Configuring the network using the control panel
3
Note
❒ Operations for System Settings are different from normal operations. After
using User Tools, press the {User Tools} key to exit.
❒ If the key operator code has been set, the key operator code entry screen ap-
pears. Enter the code, and then press [OK]. For details about the key operator
code, see Operating Instructions.
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [Interface Settings].
D
Select the setting you want to change, and then press [OK].
E
Change the setting, and then press [OK].
Note
❒ To cancel changes made to settings and return to the System Settings menu,
press [Cancel].
F
Press [Exit].
G
Press the {User Tools} key.
Note
❒ You can also exit by pressing [Exit] on the User Tools main menu.
8
AUZ102S