Ricoh Priport DX 4640PD Network Manual page 86

Appendix
❖ Interface Priority Configuration
You can assign priorities governing which interface obtains DHCP parame-
ters.
msh> dhcp priority interface_name
Note
❒ Priority assignment is useful when connecting more than one interface to the
printer.
❒ If an interface is not selected, it appears according to the currently set priority
regardless of multiple interface connections.
Interface name
ether
*1
wlan
*1
Available when the IEEE 802.11b interface unit is installed.
Reference
For details about DHCP, see p.97 "Using DHCP".
Protocol
Use the "set" command to allow or prevent remote access for each protocol.
msh> set protocol {up | down}
Protocol
tcpip
appletalk
netware
smb
9
lpr
ftp
rsh
diprint
web
snmp
ipp
http
Note
❒ If you prohibit remote access via TCP/IP and then log out, you cannot use re-
mote access. If you did this by mistake, you can use the control panel to allow
access by TCP/IP.
❒ When you prevent access via TCP/IP, you are also prevented from using lpr,
ftp, rsh, diprint, web, snmp, ipp, and http.
80
Interface to be configured
Ethernet interface
IEEE 802.11b interface
"up" means active and "down" means inactive.