Ricoh Priport DX 4640PD Network Manual page 91

❖ Setting timeout
You can specify the timeout interval in use when receiving data from the net-
work.
msh> diprint timeout [30~65535]
Note
❒ The default is 300 seconds.
❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional
or not. The default is "off".
msh> diprint bidirect {on | off}
Note
❒ If you select "on", SmartDeviceMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.
Netware
Use the "netware" command to configure the NetWare settings such as the print
server name or file server name.
msh> netware parameter
Parameter
pname
fname
encap {802.3 | 802.2 | snap
| ethernet2 | auto}
rnum
timeout
mode {pserver | ps}
mode {rprinter | rp}
context
sap_interval
login server
login tree
tree NDS tree name
Settings
Enter the NetWare print server name using up to 47 characters.
Enter the NetWare file server name using up to 47 characters.
Select the encap type.
Specify the remote printer number.
Set the timeout.
Select the print server mode.
Select the remote printer mode.
Specify the NDS context name.
Specify the SAP intervals.
Each interval can be set to between 0 and 3600 seconds in one-
second increments.
Specify "login with a selected file server" as the login mode.
Specify "login with a selected NDS tree" as the login mode.
Select the NDS tree to log on to.
Remote Maintenance by telnet
9
85