Ricoh Priport DX 4640PD Network Manual page 96

Appendix
❖ Resetting Job spool setting
msh> spoolsw clear job {on | off}
• When the printer power is cut during job spooling, this determines wheth-
er to reprint the spooled job.
❖ Protocol configuration
msh> spoolsw diprint {on | off}
msh> spoolsw lpr {on | off}
msh> spoolsw ipp {on | off}
msh> spoolsw smb {on | off}
msh> spoolsw ftp {on | off}
• You can specify the settings for diprint, lpr, ipp, and smb.
Changing the host name
Use the "hostname" command to change the printer name.
msh hostname interface_name
Interface name
ether
*2
wlan
*1
If you did not enter the interface name, it will be automatically set to the Ethernet in-
terface.
*2
Available when the IEEE 802.11b interface unit is installed.
Note
❒ Enter the printer name using up to 15 characters.
❒ You cannot use a printer name starting with "RNP" or "rnp".
9
❒ The Ethernet interface and IEEE 802.11b interface will have the same printer
name.
90
printer_name
Interface to be configured
*1
Ethernet interface
IEEE 802.11b interface