Configuring The Network Interface Module Settings - Ricoh Priport DX 4640PD Network Manual

Configuring the Network Interface Module Using a Web Image Monitor
Configuring the Network Interface Module
Settings
A
Start the Web Image Monitor.
B
In the [Address] box, enter the machine's IP address (for example http://
XXX.XXX.XXX.XXX where the Xs are the numbers of the IP address).
The status of the printer you chose appears on the Web Image Monitor.
C
Click [Administrator Mode].
The dialog box for entering the password and user name appears.
D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and enter "password"
for the password.
E
In the menu area, select the item, and then make the necessary settings.
F
Click [Apply].
The configuration is transmitted.
Reference
For details about making settings, see p.61 "Using Web Image Monitor
Help".
8
60