4.
Remove the two screws holding each metal cover plate to the device cage.
Remove the plates.
1 of 2 Cover
Plate Screws
1 of 2 Blank
Panel Tabs
Figure Section 3-36 Minitower Blank Panel Removal
Minitower 5 1/4-Inch Device Cage Removal
Remove the 5 1/4-inch device cage as follows.
Remove the top cover, front panel as previously described.
1.
NOTE: When installing a 3 1/2-inch hard disk
drive into a 5 1/4-inch slot, a 5 1/4-inch hard disk
bracket must first be attached to the 3 1/2-inch
hard disk drives.
Options
3-31
Blank
Panels