Advanced Cmos Setup; Standard Cmos Setup Parameters - NEC POWERMATE P60D Service Manual

Table Section 2-1 Standard CMOS Setup Parameters
Parameter
System Date
System Time
Floppy Drive A:
Floppy Drive B:
Drive C: Type
Drive D: Type
Drive E: Type
Drive F: Type
Drive C: Timeout
Drive D: Timeout
Drive E: Timeout
Drive F: Timeout
Mouse
Base Memory
Extended Memory

Advanced CMOS Setup

This menu allows the advanced system features to be modified, as outlined in Table Section
2-2. Selection of a parameter is with the keyboard arrow keys or
to modify the parameter. Press
PgDn
Pressing opens a small window listing the options available for the selected parameter.
F1
Pressing reverts any changed values back to the original values. Pressing
F5
the parameters to the BIOS setup defaults. Pressing
power-on defaults.
Options
mn/date/year
hour/min/sec
360 KB, 5 1/4"
1.2 MB, 5 1/4"
720 KB, 3 1/2"
1.44 MB, 3 1/2"
2.88 MB, 3 1/2"
Not Installed
Auto-Configuration
User Type 1
User Type 2
0, 5, 10 or 31
seconds
Automatically
detected
by the system
Automatically
detected
by the system
Automatically
detected
by the system
Enter
CAUTION: Incorrect settings can cause the
system to malfunction.
Setup and Operation
Description
Sets the system date.
Sets the system time.
Selects the type of diskette drive in the
system.
Selects the hard disk drive configuration.
Auto-Configuration is the default setting.
Selecting Type 1 or 2 allows configuring the
drive if not supported by Auto-Configuration.
Selects the time the system allows for auto-
configuration of the IDE drive before printing
an error message. Default is 5 seconds for
drive C:, 0 seconds for drive D:, E:, and F:.
Automatically detects if mouse is installed or
not installed.
Displays the amount of conventional
memory detected at power-on.
Displays the amount of extended memory
detected at power-on.
Enter
to exit back to the Main Menu.
changes the parameters to the
F7
2-11
key. Press or
PgUp
changes
F6