Expansion Board Removal; Top Cover Screws; Removing The Top Cover - NEC POWERMATE P60D Service Manual

2. Remove the two cover screws shown in Figure Section 5-1.
Slide the top cover toward the front about one inch.
3.
4. Lift the top cover up and off (see Figure Section 5-2).

Expansion Board Removal

Remove any installed expansion board(s) using Figure Section 5-4 through Figure Section
5-7 and the following steps.
Remove the top cover as previously described.
1.
2. Disconnect any cables leading from the expansion board(s).
Figure Section 5-1 Top Cover Screws
Figure Section 5-2 Removing the Top Cover
Desktop Repair
Screws
5-3