How To Use Setup - NEC POWERMATE P60D Service Manual

3. Setup's Main Menu appears and looks similar to the following screen.
Standard CMOS Setup for Changing Time, Date, Hard Disk Type, etc.
ESC: Exit

How to Use Setup

The Setup utility Main Menu offers the following selections.
n
Standard CMOS Setup — Use this selection to modify basic system features such
as date, time, diskette drives, hard disk drives, and keyboard.
n
Advanced CMOS Setup — Use this selection to modify advanced system features
such as enabling or disabling parity checking, cache, Num Lock, shadowing, IDE
DMA transfer modes, ISA interrupts, and ISA linear buffers.
n
Peripheral Management Setup — Use this selection to set or modify the
peripheral options associated with the I/O controller (i.e., serial and parallel port
addresses).
n
Configure with BIOS Defaults — Use this selection as a fast way to reload the
CMOS RAM with its default values from the ROM table.
n
Configure with Power-On Defaults — Use this selection as a fast way to reload
CMOS with the power up values.
n
Change Password — Use this selection to set or change the system password.
n
Write to CMOS and Exit — Use this selection to save any modifications made to
the Setup program and to exit Setup.
n
Do Not Write to CMOS and Exit — Use this selection to exit the Setup program
without saving.
System Configuration BIOS SETUP UTILITIES
1992 American Megatrends Inc., All Rights Reserved
STANDARD CMOS SETUP
ADVANCED CMOS SETUP
PERIPHERAL MANAGEMENT SETUP
CONFIGURE WITH BIOS DEFAULTS
CONFIGURE WITH POWER-ON DEFAULTS
CHANGE PASSWORD
WRITE TO CMOS AND EXIT
DO NOT WRITE TO CMOS AND EXIT
: Sel
Setup and Operation
F2/F3: Color F10: Save and Exit
2-9