Speaker Assembly Removal; Speaker Tabs - NEC POWERMATE P60D Service Manual

Speaker Assembly Removal

Remove the speaker per Figure Section 6-15 and the following steps.
1. Remove the top cover as previously described.
Unplug the speaker connector J37 on the system board.
2.
Slide the speaker over the raised spot and out from the speaker tabs (see
3.
Figure Section 6-15).
Remove the speaker from the system unit.
4.
Raised
Spot
To Connector J37
on System Board
Figure Section 6-15 Speaker Tabs
Minitower Repair 6-9
1 of 3
Tabs