When removing an expansion board from the backside of the ISA/PCI-Bus back-
board separate the inside expansion slot L-bracket from the expansion board by
removing the screw shown in Figure Section 5-7.
Figure Section 5-7 Removing the Expansion Slot L-Bracket
ISA/PCI-BUS Backboard Removal
Remove the ISA/PCI-Bus backboard from the system unit as follows.
1.
Remove the top cover and all expansion slot boards as previously described.
Remove the two ISA/PCI-Bus backboard screws (see Figure Section 5-7).
2.
Lift the backboard away from the bracket and out of the system unit.
3.
Figure Section 5-7 ISA/PCI-Bus Backboard Screws
Screw
L-Bracket
Bracket
Desktop Repair
Expansion
Board
Bracket
ISA/PCI-Bus
Backboard
Screws
5-5