Expansion Board(S); Desktop Expansion Board Installation - NEC POWERMATE P60D Service Manual

Table of Contents

Advertisement

4.
Slide the bottom access cover toward the front of the system releasing the tabs
from the cutouts in the bottom of the chassis.
Screw
Figure Section 3-8 Minitower Bottom Access Cover

Expansion Board(s)

Expansion boards plug into edge connectors on the ISA/PCI-bus backboard. There are four
expansion slots on the ISA/PCI backboard (five in the minitower). Three are 16-bit ISA slot
and one is a shared ISA/PCI-Bus expansion slot. (The minitower has one shared and one
dedicated PCI-bus connector. See Appendix A for ISA connector pin assignments.

Desktop Expansion Board Installation

Install expansion boards into the desktop system as follows.
1.
Remove the top cover as previously described.
1 of 4 Tabs
Bottom Access
Cover
Options
3-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate p60m

Table of Contents